Neoflon® PFA AP-210

全氟烷氧基

DAIKIN INDUSTRIES, Ltd.

 

产品说明:

NEOFLON PFA AP-210 is excellent in melt flowability and is suitable for injection molding and extrusion molding.

 

Introduction

• AP-210 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.

• Good melt flowability while maintaining excellent properties of PTFE. It can be melt-molded as a thermoplastic resin by injection molding and extrusion molding.

• Excellent chemical resistance which is not affected by most of the chemicals.

• Excellent heat resistance. Continuous use temperature is 260°C.

• It retains flexibility without losing toughness under the environment from cryogenic to high temperature.

• Low dielectric constant and dielectric loss tangent in a wide range of temperature and frequency.

• It shows high electrical resistance and dielectric strength.

• Nonflammable like POLYFLON PTFE and NEOFLON FEP.

• Excellent weather resistance. No properties change even when exposed outside for a long time.

• Non-stickiness. It shows excellent releasability and water repellency / oil repellency.

 

粒料特性：共聚物、良好的柔韧性、流动性高、耐候性，良好、耐化学品性能，良好、耐热性，高、韧性良好

加工方法：挤出、注射成型

供货地区：北美洲、非洲和中东、拉丁美洲、欧洲、亚太地区

 

物料参数

具有和PTFE同等性能，可熔融成型的氟树脂

NEOFLON PFA同PTFE一样，具有优秀的耐热性、耐化学品性、耐候性，可进行熔融加工的树脂。由于透光率高、高温下的机械强度优异，可用于管子、接头、晶片花篮等产品，同时其具有优良的电气性能，被广泛应用于